Blenders (.50 GPH – 1000+ GPM)

Econotrol™ ET2V-S In Line Blender

Blenders-ET2V_S

In Line Blender for Indoors or Outdoors. Great for Ethanol, Fertilizers, Fuel Oils, Dyes, or Chemicals. Unit is 304 SS Nema 4,7&9 Dust & Water Tight, Explosion Proof.

The Econotrol™ ET2-VS In line blender offers a low cost stand-alone solution for blending liquids. With an unlimited choice of meters, valves, pumps, and materials of construction, each blender can be easily made for any blending application, from very small to large flow ranges, and with a wide choice of materials. Blenders can be installed in vertical or horizontal configurations with or without a base plate. High blend qualities are assured with Economy’s Flow Computer, which displays and integrates all application parameters.

Shown right, an all stainless steel blender for bleach/hypo chlorite solutions with
turbine flowmeter.

Econotrol™ ET3P-T60 B-100

Blenders-ET3P_T60B

Bio Diesel Blending Station Prefabricated and Installed On Site.

The T60 B100 Blender, shown right, was designed by Economy Controls with Pumps, Meters, Valve Manifolds, Strainers, Filtration, Tank, & Pipework Heating complete. Components were prefabricated for rapid and cost effective installation on site. With over 40 years of experience in designing Fluid Transfer Systems, Economy builds Blending systems which address each clients’ specific needs.

System Performance, Monitoring, and Maintenance checks can be made on the System by Computers in a remote control room, or over the internet.

All Blender Computers provide Rate Of Flow Indication and Totalization of Both Main Flow and Blended B-100, Run Time, Customer I.D. Numbers, Date & Time of Transactions, and Tank Level. All Blenders can be read, configured, or operated locally or via the internet from any PC. Any Errors in system operation, e.g., Lo Tank Level, are automatically broadcast back to the host system.

Econotrol™ ET3P-32 B-100 Blender

Blenders-ET3P_32B

Bio Diesel Blenders with Digital Controls for Precise Fuel Blending. Refinery, Truck, Rail Loadouts, Metering Skids, Industrial or Marine.

Economy Controls Biofuel Blenders can be supplied with Gear Meters and Gear Pumps, shown right, which have extremely high viscosity capabilities (10,000 CP). This eliminates concerns of gelling, or slow flow under cold temperatures, which could cause pressure imbalance and errors at Dispensers. All Blenders are fully proportional under all conditions using Computerized Controls made by Economy. Using Analyzers at Retail Travel Plazas throughout the USA, no errors were detectable at the Dispensers using Economy Biodiesel blenders.

All Blender Computers provide Rate Of Flow Indication and Totalization of Both Main Flow and Blended B-100. An optional IP assignable remote management package includes Total Main Flow, Total B-100 Flow, Run Time, Customer I.D. Numbers, Date & Time of Transactions, and Tank Level. All Blenders can be read, configured, or operated locally or via the internet from any PC. Any Errors in system operation, e.g., Lo Tank Level, are automatically broadcast back to the host system.

Economy will supply only the Blender and Controls, or the entire Package, with Installation, Project Management, and Start Up, for a turn-key solution.

Econotrol™ ET3P-52 B-100 Blender

Blenders-ET3P_52B

Bio Diesel Blenders with Digital Controls for Precise Fuel Blending.
Refinery, Truck, Rail Loadouts, Metering Skids, Industrial or Marine.

The 52 B is the larger companion of the 32 B, with 52 GPM or higher flow ranges. Economy Controls Biofuel Blenders can be supplied with Gear Meters and Gear Pumps, shown right, which have extremely high viscosity capabilities (10,000 CP). This eliminates concerns of gelling, or slow flow under cold temperatures, which could cause pressure imbalance and errors at Dispensers. All Blenders are fully proportional under all conditions using Computerized Controls made by Economy. Using Analyzers at Retail Travel Plazas throughout the USA, no errors were detectable at the Dispensers using Economy Biodiesel blenders.

All Blender Computers provide Rate Of Flow Indication and Totalization of Both Main Flow and Blended B-100. An optional IP assignable remote management package includes Total Main Flow, Total B-100 Flow, Run Time, Customer I.D. Numbers, Date & Time of Transactions, and Tank Level. All Blenders can be read, configured, or operated locally or via the internet from any PC. Any Errors in system operation, e.g., Lo Tank Level, are automatically broadcast back to the host system.

Economy will supply only the Blender and Controls, or the entire Package, with Installation, Project Management, and Start Up, for a turn-key solution.

Econotrol™ ET3P-550 B-100 Blender

Blenders-ET3P_550B

Pump and Metering Skids for Biofuels, Feedstocks, Oils, Petrols, and Agrichemicals. Refinery, Truck, Rail Loadouts. Metering Skids, Industrial, Custody Transfer, or Marine.

The Blend Skid at right ratios 0 to 100% of any combination of liquids at 550 GPM, and includes an Additive Injector, manufactured by Economy Controls, for automatic addition of fuel additive proportionate to liquid materials and blended flows.

Economy Controls Skid Packages are shop-fabicated, wired, and completely operated with Local or Remote Control Systems before shipment, and each system is tested for performance and accuracy by experienced and licensed technicians.

Our products are known for their High Quality and Reliability by thousands of customers around the world. Each year, Economy provides parts and service to customers who purchased our products over 30 years ago, and those same products continue in operation today.